Mostly produced in steel, the bonnet covers the engine compartment and protects it from direct weather conditions. It was designed to make safer accidental impacts with pedestrians, obviously at low speeds.

Also, while still in the production stage, programmed collapse and retention points are provided in the bonnet so in case of a front collision, it won’t back up towards the windscreen, putting the safety of those on board at risk.

• Notable fuel efficiency
• Maximum engine protection
• Passenger safety in case of front collision
• Distinctive design
• Ergonomic comfort when opening

Bumpers are considered your car’s “sacrificial” element: thanks to their high deformability, they shield the parts that would otherwise be damaged in case of light collisions. There are two types of collisions: the pedestrian collision, where the impact has to be correctly distributed over the entire bumper surface to soften its power, and the insurance collision, designed to limit damage to other car parts, like the sides or headlights.
This body component is usually “primed”, or treated with a special grey or black coat called “primer” that enables the correct absorption of the coloured paint and for perfect colour uniformity in both the plastic and metal parts.

• Aerodynamic efficiency
• Optimisation of consumptions

Together with the bonnet, the fenders define the front design part of your car.
But most importantly, they have a fundamental role in terms of protection from small stones hitting the car when it is rolling along.

Their shape has been studied to achieve significant aerodynamic performance and high anti dent and deformation objectives.  During testing, fenders are subjected to harsh trials relative to international regulations concerning hitting pedestrians, involving collapsing on impact, obviously within the limits of predetermined speeds.

• High mechanical performance
• Absolute aerodynamics
• Noise Reduction in passenger compartment

The sacrificial cross members protect both the front and rear parts of your car, limiting the damage caused by collisions under 15 Km/h, which is statistically the typical speed for an urban rear-end collision. They act as “protection” with respect to the other body parts, which are much more costly to repair or replace.
They are part of those components that work together to increase a car’s passive safety, because their role is to absorb the kinetic energy of your car and of those on board during an impact, thus reducing the serious consequences of an accident.

• Ease of replacement
• Repair or replacement costs Containment

The Crash Box has the difficult task of absorbing energy in case of a collision and is connected to your car’s front and rear struts.
Energy absorption is very important for the car to work properly, because it prevents deformation of unfastened or sensitive components, like the engine cooling system.

• Large capacity to absorb energy

Buffers play a significant role. They serve to diminish damage to the bumpers in impacts at very low speeds, when, for example you are parking and you bump into another car.

• Powerful damage reduction in case of impact

The side doors are made to guarantee maximum continuity with your car's design. But their role goes well beyond simple aesthetic value: they protect those on board from side or frontal collisions. Among your car’s most used components, the doors are special systems, made from different materials: a structural skeleton in steel or aluminium, connected to the car by hinges and covered with all accessories needed to guarantee waterproofing, and to operate electrical parts like window raisers, music diffusion and courtesy lights. In addition, they are inspired to give maximum visual and tactile ergonomic comfort and pleasant aesthetics.

• Maximum protection for those on board
• Absolute coherence with your car’s distinctive line